Payment & Shipping Terms:
|Paper Laying:||Automatic||Caul Plate Changing:||Automatic|
|Synchronous:||Single Side||Loading And Unloading:||Clamping Type|
elamine press machine,
mdf lamination machine
WDT-ADP D Automatic Laminating Production Line
1. Raw board: particle boards, MDF boards and HDF boards Product: furniture board,laminate flooring.
2. Overlaying materials: melamine paper, Al2O3 abrasion resistant paper
3. Standard sizes: 4’×10’, 4’×16’, 6’×8’, 6’×9’, 6’×12’, 6’×16’,7’×9’, 7’×10’, 7’×18’, 6’×16’.
4. Its loader is equipped with compressed air clamp to load board.
Automatic Paper Laying, automatic caul plate changing, single side synchronous, automatic loading and unloading, automatic cooling, high efficiency, easy for worker to operate, reliable equipment, particularly suitable for production of large size boards and large output occasion.
*Note: If user has special need, we could design according to user’s need.
Automatic operation, high efficiency, easy operation, reliable performance, particularly suitable for production of large size boards and large output occasion. This line need only 1-2 workers.
Our designer has worked in this industry for more than 30 years, he is experienced,famous and leading in woodworking machine. Our supplier is the famous ones in their industry, this guarantees the high quality of our machine. Following are some suppliers of key parts.
We are the first Chinese factory who successfully produced double side synchronous production line.
1)Short Preparing Time: about 15s
High production capacity: 120-150Sheets/h(Calculated Based on: Pressure Holding Time is 15s, The Thickness of Raw Board is 16mm/18mm)
2)The Thermal Oil Temperature of Hot Press is Controlled Automatically
If The Oil Temperature is 30℃-40℃,The Control System Will Turn Off The Chiller Automatically; If The Oil Temperature is Over 40℃,The Control System Will Turn on The Chiller Automatically.
3)Most of Device are Used International Brand. The Whole Line Runs Automatically Except Laying Paper and Changing Caul Plate.Taking and Stacking the Protect Board are Also Automatic. The Operation is Convenient and Easy.
4)Each Operation Cabinet can Supply Full-automatic, Semi-automatic and Manual Control. It is Equipped With Uninterruptible Power Supply, So It Could Guarantee the PLC,HMI and All Magnetic Valve of Hydraulic System in Normal Working When the Equipment is Power Failure Suddenly and Avoid the Damage for Equipment.
5)The frame of press is manufactured from a whole high quality plain steel plate and stress analysis and computation in detail to ensure the enough stiffness and safety factor. The whole working surface of the frame is processed by machine tool; the frame has high accuracy, which ensures the quality of the finished board.
6) Loading and unloading machine are composed of loading with clamp and unloading with vacuum cups. They are driven by servo motor to ensure the accuracy is high and work steadily.
7) Stacking Carrier Use Servo Motor Driving to Ensure Stacking Neatly.
8) The Cylinder Sealing is Used of Combination Seal. The Sealing is Reliable and Extends the Using Life. The Normal Using Life is 3-5 Years, Many Customers Use More Than 5 Years.
9) Trimming and Cooling Machine Works Stable.
Layout Drawing of WDT-ADP Basic Short Cycle Laminating
Main Device List of Producer
|9||Hydraulic proportional valve||Rexroth|
|10||Main hydraulic valve||Rexroth|
|12||Motor of hydraulic pump||ABB/Siemens|
|19||Bearing with base||China brand|
Contact Person: Ms. Lydia